LR3/Disco 3
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the accessory drive belt. For additional information, refer to
Accessory Drive Belt (86.10.03)
(Section 303-05)
3 .
Using the special tool, retain the crankshaft front pulley.
4 .
NOTE :
The crankshaft pulley retaining bolt will be very tight.
Remove the crankshaft pulley retaining bolt.
Discard the bolt.
5 .
Using the special tools, remove the crankshaft pulley.
Collect the washer.
6 .
Remove the special tools from the crankshaft pulley.
7 .
Using the special tool, remove the crankshaft front seal.
