LR3/Disco 3
Camshaft Drive Cassette LH (12.65.36)
Removal
Installation
Published : Jun 30, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the cylinder head LH assembly. For additional information, refer to
Cylinder Head LH
(12.29.04)
(Section 303-01)
3 .
Remove the timing drive components. For additional information, refer to
Timing Drive Components
(12.65.13)
(Section 303-01)
4 .
Remove the camshaft drive cassette assembly.
Remove the bolt retaining the chain guide.
5 .
NOTE :
Do not disassemble further if the component is removed for access only.
Disassemble the cassette assembly.
Release the cable tie.
Remove the sprockets and the chain.
Clean and inspect the components for deterioration.
1 .
Assemble the cassette assembly.
Install the chain and the sprockets.
