LR3/Disco 3
Cylinder Head RH (12.29.05)
Removal
Published : Jun 29, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Drain the coolant. For additional information, refer to
Cooling System Draining, Filling and Bleeding
(26.10.01)
(Section 303-03)
3 .
Refer to camshaft timing. For additional information, refer to (Section 303-01)
4 .
Remove the exhaust manifold. For additional information, refer to
Exhaust Manifold RH (30.15.11)
(Section 303-01)
5 .
Position the generator mounting bracket aside.
Remove the 3 bolts.
Release the wiring harness clip.
Disconnect the engine coolant temperature (ECT) sensor electrical connector.
6 .
Remove the cylinder block coolant outlet elbow.
Disconnect the engine coolant temperature (ECT) sensor electrical connector.
Release the clip securing the coolant pump hose.
Remove the 3 bolts.