LR3/Disco 3
Jackshaft (12.65.38)
Special Service Tools
Sprocket holding tool RH rear cassette
303-643
Removal
Published : Jun 30, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the torque converter flexplate. For additional information, refer to
Flexplate (12.53.13)
(Section 303-01)
3 .
Remove the cylinder block jackshaft plug.
Drift to release.
4 .
Using the special tool, remove the RH cassette jackshaft drive, sprocket bolt.
Remove and discard the Torx bolt.
5 .
Remove the camshaft drive cassette LH assembly. For additional information, refer to
Camshaft