LR3/Disco 3
Engine Front Cover (12.65.01)
Removal
Published : Jun 30, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Drain the cooling system. For additional information, refer to
Cooling System Draining, Filling and
Bleeding (26.10.01)
(Section 303-03)
3 .
Remove the intake manifold. For additional information, refer to
Intake Manifold (30.15.02)
(Section
303-01)
4 .
Remove the crankshaft pulley. For additional information, refer to
Crankshaft Pulley (12.21.01)
(Section 303-01)
5 .
Remove the cooling fan lower shroud.
Release 2 clips from the cooling fan lower shroud.
Release and remove the cooling fan lower shroud from the cooling pack.
6 .
Position the A/C compressor mounting bracket assembly aside.
Remove the 4 bolts.
Tie aside.