LR3/Disco 3
3 .
Install the balance shaft.
Clean the component mating faces.
Engage the drive chain.
Install the drive chain tensioner.
Tighten the new Torx bolts to 29 Nm (21 lb.ft)
Remove the locking pin.
Remove the special tool.
4 .
Install the cylinder block cradle. For additional information, refer to
Cylinder Block Cradle (12.25.06)
(Section 303-01)
5 .
Install the front wheels and tires.
6 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
