LR3/Disco 3
Engine Dynamic Balance Shaft (12.65.38)
Special Service Tools
Crankshaft TDC timing/locking tool
303-565
Removal
Published : Jun 30, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the front wheels and tires.
4 .
Remove the cylinder block cradle. For additional information, refer to
Cylinder Block Cradle
(12.25.06)
(Section 303-01)
5 .
Remove the balance shaft.
Remove and discard the 4 Torx bolts.
Remove the drive chain tensioner.
Remove the tensioner blade.