LR3/Disco 3
Engine Mount RH (12.45.12)
Removal
Published : May 26, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the RH exhaust manifold. For additional information, refer to
Exhaust Manifold RH
(30.15.11)
(Section 303-01)
4 .
CAUTION: Protect the engine during this operation.
Remove the engine mount bracket.
Support the engine.
Remove the nut.
Remove the 4 bolts.
5 .
Remove the engine mount.
Remove and discard the 2 bolts.
