LR3/Disco 3
Oil Pan (12.60.44)
Removal
Installation
Published : Jun 23, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Drain the engine oil. For additional information, refer to
Engine Oil Draining and Filling (12.60.05)
(Section 303-01)
4 .
Release the harness bracket.
Remove the 2 nuts.
5 .
Remove the oil pan.
Remove the 10 bolts.
Remove and discard the gasket.
1 .
Install the oil pan.
Clean the component mating faces.