LR3/Disco 3
Cylinder Block Cradle (12.25.06)
Special Service Tools
Cylinder block cradle insert adjustment tool
303-596
Removal
Published : Jun 21, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the front wheels and tires.
4 .
Remove the starter motor. For additional information, refer to
Starter Motor (86.60.01)
(Section 303-
06)
5 .
Remove the front axle tube. For additional information, refer to
Axle Tube (47.10.42)
(Section 205-
03)
6 .
Remove the oil pan. For additional information, refer to
Oil Pan (12.60.44)
(Section 303-01)
7 .
Remove the front stabilizer bar. For additional information, refer to
Stabilizer Bar (60.10.01)
(Section
204-01)
8 .
Remove the radiator access panel.
Remove the 4 bolts.