LR3/Disco 3
Exhaust Manifold RH (30.15.11)
Removal
Published : May 10, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 4.0L (12.30.50)
(Section 501-05)
3 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
4 .
Release the exhaust system from the exhaust manifold.
Remove and discard the 2 bolts.
5 .
Lower the vehicle.
6 .
Disconnect the high tension (HT) electrical connectors.
Move the leads aside for access.
7 .
Remove the exhaust manifold.
Remove the 6 nuts.
Remove and discard the gasket.