LR3/Disco 3
Installation
1 .
Install the exhaust manifold.
Clean the component mating faces.
Install a new gasket.
Evenly and progressively, tighten the nuts to 25 Nm (18 lb.ft).
2 .
Connect the HT electrical connectors.
3 .
Raise the vehicle.
4 .
Install the exhaust system.
Clean the component mating faces.
Install new bolts and tighten to 40 Nm (30 lb.ft).
5 .
Lower the vehicle.
6 .
Install the engine cover. For additional information, refer to
Engine Cover - 4.0L (12.30.50)
(Section
501-05)
7 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)