LR3/Disco 3
Oil Cooler (12.60.68)
Removal
Installation
Published : Jul 10, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the oil filter.
Position a container to collect the fluid.
4 .
NOTE :
Note the fitted position of the oil cooler assembly.
Remove the oil filter adapter.
Release the cooler from the oil filter head.
5 .
Clamp, then disconnect the coolant hoses from the oil cooler.
6 .
Remove the oil cooler.
1 .