LR3/Disco 3
Hydraulic Timing Chain Tensioner LH (12.65.65)
Removal
Installation
Published : Jun 30, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the intake manifold. For additional information, refer to
Intake Manifold (30.15.02)
(Section
303-01)
3 .
CAUTION: Before the disconnection or removal of any components, ensure the area around
joint faces and connections are clean. Plug any open connections to prevent contamination.
Remove the LH hydraulic timing chain tensioner.
1 .
Install the LH hydraulic timing chain tensioner.
Clean the component mating faces.
Tighten the tensioner to 45 Nm (33 lb.ft).
2 .
Install the intake manifold. For additional information, refer to
Intake Manifold (30.15.02)
(Section
303-01)
3 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)