LR3/Disco 3
Installation
6 .
Using the special tools, remove and discard the crankshaft rear oil seal.
Install the 6 self-tapping screws.
Adjust the 2 nuts.
Tighten the center bolt.
1 .
CAUTION: Do not lubricate the components.
Partially install the crankshaft rear oil seal.
Make sure the components are clean and dry.
Carefully remove the transit sleeve, leaving the seal on the crankshaft.
2 .
CAUTION: Make sure the seal is installed parallel
Using the special tool, install the crankshaft rear oil seal.
Tighten the special tool nuts evenly and progressively to fully install the seal.
