LR3/Disco 3
7 .
Connect the EGR pipe and exhaust manifold flanges.
Tighten the nuts to 25 Nm (18 lb.ft).
8 .
Install the CMP sensor.
Tighten the Torx screw to 7 Nm (5 lb.ft).
Connect the electrical connector.
9 .
Install the LH bank camshafts. For additional information, refer to
Camshafts LH (12.13.21)
(Section
303-01)
10 .
Install the intake manifold. For additional information, refer to
Intake Manifold Assembly (30.15.02)
(Section 303-04)
11 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)