LR3/Disco 3
Engine Front Cover (12.65.01)
Removal
Published : Feb 28, 2005
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Drain the cooling system. For additional information, refer to
Cooling System Draining, Filling and
Bleeding (26.10.01)
(Section 303-03)
4 .
Remove the throttle body gasket. For additional information, refer to
Throttle Body Gasket
(Section
303-04)
5 .
Remove the crankshaft front oil seal. For additional information, refer to
Crankshaft Front Seal
(12.21.14)
(Section 303-01)
6 .
Remove the cooling fan lower shroud.
Release 2 clips from the cooling fan lower shroud.
Release and remove the cooling fan lower shroud from the cooling pack.
7 .
Remove the air conditioning (A/C) compressor. For additional information, refer to
Air Conditioning
(A/C) Compressor (82.10.20)
(Section 412-03B )
8 .
Remove the A/C compressor mounting bracket.
Remove the 2 bolts.