LR3/Disco 3
Engine Mount LH (12.45.11)
Special Service Tools
Ball joint separator
205-754 (LRT-54-027)
Removal
Published : Apr 22, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the LH front wheel.
4 .
Remove the engine undershield. For additional information, refer to
Engine Undershield (76.10.50)
(Section 501-02)
5 .
Remove the engine compartment LH upper heat shield.
Remove the screw.
6 .
NOTE :
The heatshield consists of 3 parts.
Remove the upper suspension arm and brake line heat shields for access.
Remove the 3 nuts.
Remove the 3 bolts.
