LR3/Disco 3
Installation
All vehicles
Left-hand drive vehicles
All vehicles
1 .
Clean the component mating faces.
2 .
Install the exhaust manifold.
Install the gasket/heat shield.
Tighten the heat shield bolt to 25 Nm (18 lb.ft).
Install, and lightly tighten the bolts.
Evenly and progressively, tighten the bolts in the sequence shown to 20 Nm (15 lb.ft).
3 .
Connect the EGR pipe and exhaust manifold flanges.
Install a new gasket.
Tighten the nuts to 25 Nm (18 lb.ft).
Tighten the bolts to 25 Nm (18 lb.ft).
1 .
Install the steering column lower universal joint assembly.
Clean the component mating faces.
Install new patchlock bolts and tighten to 25 Nm (18 lb.ft).
1 .