LR3/Disco 3
Exhaust Manifold RH (30.15.11)
Removal
Published : May 13, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
3 .
Remove the fender splash shield. For additional information, refer to
Fender Splash Shield
(76.10.48)
(Section 501-02)
4 .
NOTE :
The heatshield consists of 3 parts.
Remove the upper suspension arm and brake line heat shields for access.
Remove the 3 nuts.
Remove the 3 bolts.
5 .
Remove the exhaust manifold.
Remove the 8 bolts.
Collect the spacers and discard the bolts.
Remove the gasket/heat shield retaining bolt.
Discard the gasket/heat shield.