LR3/Disco 3
Installation
6 .
Clamp, then disconnect the coolant hoses from the oil cooler.
7 .
Remove the oil cooler.
1 .
NOTE :
Fill the cooler with coolant to eliminate the air, prior to connecting the coolant hoses.
To install, reverse the removal procedure.
Tighten the adapter to 60 Nm (44 lb.ft)
Lubricate the oil filter seal with clean engine oil and tighten to 18 Nm (13 lb.ft).
Tighten the bolts to 10 Nm (7 lb.ft).
2 .
Check and top up the engine oil.
3 .
Top up and bleed the coolant.