LR3/Disco 3
Oil Pan (12.60.44)
Removal
Published : Apr 28, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Drain the engine oil.
4 .
Remove the oil cooler assembly. For additional information, refer to
Oil Cooler (12.60.68)
(Section
303-01)
5 .
Remove the engine front cover. For additional information, refer to
Engine Front Cover (12.65.01)
(Section 303-01)
6 .
Remove the front differential. For additional information, refer to
Axle Assembly (54.10.01)
(Section
205-03)
7 .
Remove the steering gear. For additional information, refer to
Steering Gear - 4.4L (57.10.01)
(Section 211-02)
8 .
Remove the generator. For additional information, refer to
Generator (86.10.02)
(Section 414-02)
9 .
Remove the generator mounting bracket.
Remove the 4 bolts.
10 .
Disconnect the heated oxygen sensor (HO2S) electrical connectors.
Release the 8 wiring harness securing clips.