LR3/Disco 3
6 .
Connect the VCT oil solenoid electrical connector.
7 .
Attach the engine wiring harness to the retaining bracket.
8 .
With assistance, install the oil level indicator and tube.
Clean the component mating faces.
Install a new O-ring seal.
Lubricate the seal with clean engine oil.
Tighten the nut to 6 Nm (4 lb.ft).
9 .
Install the ignition coil-on-plug. For additional information, refer to
Ignition Coil-On-Plug (18.20.44)
(Section 303-07)
10 .
Install the remaining ignition coil-on-plugs.
