LR3/Disco 3
Engine Oil Draining and Filling (12.60.05)
Special Service Tools
Oil filter element remover
303-1128
1 . Disconnect the battery ground cable.
Specifications
2 .
Raise and support the vehicle.
3 . Remove the engine cover.
Engine Cover - 2.7L Diesel (12.30.50)
4 .
Using the special tool, remove the oil filter element.
Published : Oct 10, 2005
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on
safety stands.
CAUTION: When removing the oil filter assembly, make sure the fuel temperature sensor is not
damaged.
Loosen the element cover 4 complete turns to allow engine oil to drain from the filter cover.
Remove element cover.
Remove and discard the O-ring seal.