LR3/Disco 3
5 . Remove the engine undershield.
Engine Undershield (76.10.50)
6 . Remove the lubricant drain plug.
7 . Install the lubricant drain plug.
8 . Install the oil filter element.
Position a container to collect the fluid.
Discard the oil pan drain plug seal.
Clean the component mating faces.
Install a new sealing washer.
Tighten the drain plug to 25 Nm (18 lb.ft).
Clean the components.
Make sure the oil filter element spigot aligns with the hole in the filter housing.