LR3/Disco 3
7 .
Install the camshaft bearing caps.
Tighten the bolts evenly in three stages in the sequence shown.
Stage one: Tighten to 1 Nm (1 lb.ft).
Stage two: Tighten to 5 Nm (4 lb.ft).
Stage three: Tighten to 10 Nm (7 lb.ft).
8 .
Release the secondary timing chain tensioner piston.
Remove the locking pin.
9 .
Install the RH valve cover. For additional information, refer to
Valve Cover RH (12.29.44)
(Section
303-01)
10 .
Install the brake vacuum pump. For additional information, refer to
Brake Vacuum Pump - 2.7L
Diesel (70.50.19)
(Section 206-07)
11 .
Install the camshaft front seal. For additional information, refer to
Camshaft Front Seal (12.13.44)
(Section 303-01)