LR3/Disco 3
Stage four: Tighten a further 180 degrees.
5 .
Install the hydraulic adjuster and rocker assemblies.
6 .
Connect the LH glow plug wiring harness electrical connector.
7 .
NOTE :
Install new O-ring seals.
Install the cylinder head coolant outlet connector.
Install the four retaining bolts and tighten to 10 Nm (7 lb.ft).
8 .
Install the LH exhaust manifold. For additional information, refer to
Exhaust Manifold LH (30.15.10)
(Section 303-01)
9 .
Install the LH bank camshafts.
10 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
