LR3/Disco 3
Cylinder Head RH (12.29.05)
Removal
Published : Aug 10, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00 Charging System - General Information)
2 .
Remove the RH exhaust manifold. For additional information, refer to
Exhaust Manifold RH
(30.15.11)
(Section 303-01C Engine - 2.7L Diesel)
3 .
Remove the RH camshafts.
4 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
5 .
Release the engine breather tube.
Remove the retaining bolt.
6 .
Release the coolant bleed hose.
Release the retaining clip.
7 .
Remove the cylinder head coolant elbow.
Release the two retaining clips and disconnect the hoses.
Remove the four retaining bolts.
