LR3/Disco 3
Installation
Remove and discard the O-ring seals.
8 .
Remove the hydraulic adjuster and rocker assemblies.
9 .
CAUTION: The cylinder head must not be placed mating face down. Failure to follow this
instruction may result in damage to the vehicle.
CAUTION: Only use a plastic scraper to clean off the old gasket.
Remove the RH cylinder head assembly.
Remove and discard the eight cylinder head bolts.
Remove and discard the cylinder head gasket.
1 .
Clean the component mating faces.
2 .
Check cylinder head face for distortion, across the center and from corner to corner. For additional