LR3/Disco 3
3 .
Tighten the exhaust cross-over pipe retaining nut to 24 Nm (18 lb.ft).
4 .
Lower the vehicle.
5 .
Tighten the two exhaust cross-over pipe retaining nuts to 24 Nm (18 lb.ft).
6 .
Install the RH exhaust manifold heat shield.
Install the three retaining bolts and tighten to 10 Nm (7 lb.ft).
7 .
Install the RH EGR valve. For additional information, refer to
Exhaust Gas Recirculation (EGR)
Valve RH (17.45.17)
(Section 303-08)
8 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
