LR3/Disco 3
Flexplate (12.53.13)
Special Service Tools
Flex plate locking tool (LRT-12-145)
303-947
Removal
Installation
Published : Feb 23, 2005
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the transmission. For additional information, refer to (Section 307-01)
4 .
Remove the torque converter flexplate.
Using the special tool, lock the flexplate.
Remove the 8 Torx bolts.
1 .
CAUTION: Tighten the bolts in a diagonal sequence.
Install the torque converter flexplate.
Clean the component mating faces.