Land Rover Workshop Service and Repair Manuals

4 . 

  Release the coolant bleed hose from the LH exhaust gas recirculation (EGR) coolant inlet hose.

Release the retaining clip. 

5 . 

  Remove the cylinder head coolant elbow. 

Release the two retaining clips and disconnect the hoses.

Remove the four retaining bolts. 

Remove and discard the O-ring seals. 

6 . 

  Disconnect the knock sensors (KS) electrical connector.

Release the KS harness from the valve cover.

7 . 

  Remove the LH KS. 

Remove the retaining bolt.