LR3/Disco 3
Installation
1 .
Install the oil pan.
Clean the component mating faces.
Install a new gasket.
Evenly and progressively tighten the bolts to 10 Nm (7 lb.ft).
2 .
Connect the engine wiring harness.
Attach the engine wiring harness to the retaining bracket.
3 .
Install the oil temperature sensor.
Install a new O-ring seal.
Tighten the sensor to 10 Nm (7 lb.ft).
Connect the electrical connector.
4 .
Fill the engine with oil. For additional information, refer to
Engine Oil Draining and Filling (12.60.05)
(Section 303-01)
5 .
Install the engine cover. For additional information, refer to
Engine Cover - 2.7L Diesel (12.30.50)
(Section 501-05)
6 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)