LR3/Disco 3
Oil Pump (12.60.26)
Removal
Published : Aug 10, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the generator. For additional information, refer to
Generator (86.10.02)
(Section 414-02)
3 .
Remove the accessory drive belt tensioner.
Remove the retaining bolt.
4 .
Remove the crankshaft front oil seal. For additional information, refer to
Crankshaft Front Seal
(12.21.14)
(Section 303-01)
5 .
Remove the generator mounting bracket.
Remove the five retaining bolts.
6 .
Remove the timing belt idler pulley.
Remove the retaining bolt.