LR3/Disco 3
Installation
16 .
Remove the timing belt cover.
Fully loosen the 16 timing belt cover retaining bolts.
Release the 2 wiring harness clips.
1 .
Install the timing belt cover.
Attach the 2 wiring harness clips.
Tighten the 16 timing belt cover retaining bolts to 10 Nm (7 lb.ft).
2 .
Install the coolant pump and accessory drive belt idler pulleys.
Tighten the six retaining bolts to 23 Nm (17 lb.ft).
3 .
Connect the right-hand EGR coolant inlet hose to the EGR cooler.
Install the coolant hose retaining clip.
4 .
Secure the EGR valve outlet tube clamps to the timing cover.
Install the two retaining bolts.
5 .
Connect the coolant hose to the cylinder head coolant outlet elbow.
Install the retaining clip.
6 .
Install the accessory drive belt idler.
Install the retaining bolt and tighten to 47 Nm (35 lb.ft).
7 .
Install the crankshaft damper.