LR3/Disco 3
Tighten the six retaining bolts to 23 Nm (17 lb.ft).
8 .
Install the fan cowl. For additional information, refer to
Cooling Fan Shroud (26.25.11)
(Section 303-
03)
9 .
Install the intake air shutoff throttle elbow support bracket.
Install the three retaining bolts and tighten to 10 Nm (7 lb.ft).
10 .
Secure the intake air shutoff throttle elbow.
Install the retaining clip.
Install the retaining bolt.
Connect the electrical connector.
11 .
Install the engine cover. For additional information, refer to
Engine Cover - 2.7L Diesel (12.30.50)
(Section 501-05)
12 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
13 .
Refill and bleed the cooling system. For additional information, refer to
Cooling System Draining,
Filling and Bleeding (26.10.01)
(Section 303-03)
