LR3/Disco 3
16 .
Install the starter motor. For additional information, refer to
Starter Motor (86.60.01)
(Section 303-
06)
17 .
Install the oil strainer pick-up assembly. For additional information, refer to
Oil Pump Screen and
Pickup Tube (12.60.20)
(Section 303-01)
18 .
Connect the fuel cooler line.
Remove the blanking caps from the ports.
19 .
Attach the transmission cooler pipes.
Tighten the retaining bolt to 10 Nm (7 lb.ft).
20 .
Install the turbocharger heat shield.
Install the two retaining bolts.
Tighten to 10 Nm (7 lb.ft).