LR3/Disco 3
21 .
Install the differential mounting bracket heat shield.
Tighten to 10 Nm (7 lb.ft).
22 .
Install the turbocharger support bracket.
Tighten the retaining nut and two bolts to 22 Nm (16 lb.ft).
23 .
Install the exhaust cross-over pipe.
Install new gaskets.
Install new retaining nuts.
Tighten the nuts to 22 Nm (16 lb. ft).
Install the exhaust manifold heatshield retaining bolt.
Tighten the bolt to 10 Nm (7 lb.ft).
