LR3/Disco 3
24 .
Attach the exhaust cross-over pipe to the LH exhaust manifold.
Install new retaining nuts.
Install the exhaust manifold heatshield retaining bolt.
Tighten the nuts to 22 Nm (16 lb. ft).
Tighten the bolt to 10 Nm (7 lb.ft).
25 .
Secure the exhaust cross-over pipe center support bracket.
Tighten the retaining bolts to 25 Nm (18 lb.ft).
26 .
Install the exhaust cross-over pipe RH support bracket.
Align the exhaust cross-over pipe support bracket assembly.
Tighten the retaining bolts to 25 Nm (18 lb.ft).
