LR3/Disco 3
27 .
Install the exhaust cross-over pipe LH support bracket.
Tighten the retaining bolts to 25 Nm (18 lb.ft).
Attach the wiring harness.
28 .
Install the exhaust heat shield.
Install the seven retaining nuts.
29 .
Install the front driveshaft. For additional information, refer to
Front Driveshaft - 2.7L Diesel
(47.15.02)
(Section 205-01)
30 .
Remove the transmission support insulator through-bolt.
Support the transfer case.
