LR3/Disco 3
Coolant Expansion Tank (26.15.01)
Removal
Published : May 7, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
3 .
Remove the cooling fan lower shroud. For additional information, refer to
Cooling Fan Shroud
(26.25.11)
(Section 303-03)
4 .
Release the windshield washer reservoir filler neck.
5 .
Release the coolant expansion tank.
Remove the 2 bolts.
6 .
NOTE :
Note the position of the differential breather line.
Release the power steering fluid cooler.
Release the 2 clips.
7 .
Release the power steering fluid reservoir.
