LR3/Disco 3
8 .
WARNING: Since injury such as scalding could be caused by escaping steam or coolant, do
not remove the filler cap from the coolant expansion tank while the system is hot.
CAUTION: Engine coolant will damage the paint finished surfaces. If spilt, immediately remove
the coolant and clean the area with water.
Disconnect the 2 hose from the coolant expansion tank.
Position an absorbent cloth to collect fluid spillage.
Position a container to collect the fluid.
Clamp the hoses
Release the 2 clips.
9 .
Remove the coolant expansion tank.
Disconnect the coolant low level sensor electrical connector.
10 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the coolant low level sensor.
11 .
Remove the coolant expansion tank support bracket.
