LR3/Disco 3
Installation
1 .
Install the bracket.
2 .
Install the coolant low level sensor.
3 .
Install the coolant expansion tank.
Connect the low level sensor electrical connector.
4 .
Connect the coolant hoses to the expansion tank.
Secure with the clips.
Remove the hose clamps.
5 .
Secure the power steering fluid reservoir.
Attach to the mounting bracket.
6 .
Position the front differential breather line.
7 .
Secure the power steering fluid cooler line.
Secure in the clips.
8 .
Secure the coolant expansion tank.
Tighten the bolts to 10 Nm (7 lb.ft).
9 .
Secure the windshield washer reservoir filler neck.