LR3/Disco 3
Fuel Rail (19.60.04)
Special Service Tools
Fuel spring lock decoupling tool
310-044
Removal
Published : Apr 18, 2005
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near
any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow
these instructions may result in personal injury.
WARNING: Do not carry or operate cellular phones when working on or near any fuel related
components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions
may result in personal injury.
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the intake manifold. For additional information, refer to
Intake Manifold (30.15.02)
(Section
303-01)
3 .
Release the fuel supply line.
Remove the bolt.
4 .
WARNING: The spilling of fuel is unavoidable during this operation. Ensure that all necessary
precautions are taken to prevent fire and explosion.
Using the special tool, disconnect the fuel line.
Position an absorbent cloth to collect fluid spillage.
Depress the quick release connector.
