LR3/Disco 3
The fuel injectors are operated directly by the ECM for fuel metering (start of injection and quantity of fuel injected).
The operating components of the piezo fuel injectors are:
The piezo actuator
The injector body containing the hydraulic servo system
The fuel injector nozzle
NOTE :
NOTE :
NOTE :
Fuel Injector Not Actuated (Not Injecting Fuel)
2
-
HP connection
3
-
Control piston
4
-
Nozzle needle
5
-
Nozzle HP chamber
6
-
Nozzle spray holes
7
-
Valve mushroom
8
-
Fuel return
9
-
Valve piston
10
-
Piezo actuator
New injectors can be installed in any cylinder and DO NOT have to be configured.
Each Injection event is controlled by a charge and discharge cycle allowing energy to dissipate in, and recover
from, the injector. Never disconnect the wiring connector when the vehicle is running. The injector may remain
open thus causing engine damage.
For safety reasons, the engine must be at standstill for 30 seconds before starting work on the HP fuel systems.