LR3/Disco 3
15 .
Install the special tool studs.
16 .
CAUTION: Make sure the fuel injector remover legs are correctly engaged to the fuel injector.
Failure to follow this instruction may result in damage to the component.
Install the special tool remover legs to the studs.
17 .
Remove the fuel injector.
Install the special tool locking plate to the remover legs.
Rotate the special tool bolts evenly, in a clockwise direction.
Remove the special tool.
Remove and discard the fuel injector retaining clamp.
Remove and discard the sealing washer.
