LR3/Disco 3
Installation
1 .
CAUTION: Do not disassemble the fuel injectors or clean the nozzles, even with an ultrasonic
cleaner. Always install new fuel injectors when required.
CAUTION: Do not use tools to install the new fuel return line retaining clip. Failure to follow
this instruction will result in damage to the retaining clip.
Install a new fuel injector retaining clamp.
1. Install the fuel injector retaining clamp spacer.
2. Install a new fuel return line retaining clip.
3. Install a new sealing washer.
2 .
Install the fuel injector.
Install the two bolts and tighten to 10 Nm (7 lb.ft).
3 .
CAUTION: Make sure the fuel return line retaining clip is correctly installed to the fuel injector
before installing the return line.
Connect the fuel return line to the fuel injector.
Visually inspect the fuel return line O-ring seals for damage.
Apply a light coating of petroleum jelly to the fuel return line O-ring seals.
4 .
