LR3/Disco 3
Tighten to 25 Nm (18 lb.ft).
Remove and discard the fuel injection pump belt tensioner locking pin.
11 .
Install the fuel injection pump belt cover.
Reposition the fuel charging wiring harness to allow access to the fuel injection pump belt
cover.
12 .
Install the crankcase vent oil separator. For additional information, refer to
Crankcase Vent Oil
Separator (17.10.04)
(Section 303-08)
13 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
14 .
Bleed the fuel system.
