LR3/Disco 3
27 .
Remove the 3 turbocharger retaining nuts.
28 .
Remove the turbocharger.
Reposition the turbocharger.
29 .
Remove and discard the two retaining studs.
Install blanking caps to the exposed ports.
30 .
WARNING: Eye protection must be worn.
WARNING: Never direct a high-pressure nozzle at the skin as the high-pressure air may
penetrate to the underlying tissue, and cause serious injury.
CAUTION: Always keep high-pressure equipment in good condition, and regularly maintained,
particularly at joints and unions.
Drill two 8 mm (0.3 inches) holes in the turbocharger as shown.