LR3/Disco 3
Installation
Clean the turbocharger and blow out with an air line.
1 .
Install the turbocharger.
Reposition the turbocharger.
2 .
Align the turbocharger.
Tighten the turbocharger retaining nuts to 24 Nm (18 lb.ft).
3 .
Connect the turbocharger electrical connector.
4 .
Connect the turbocharger outlet pipe.
Tighten the clip.
5 .
Connect the turbocharger intake tube.
Reposition the turbocharger intake pipe to turbocharger connecting hose.
Tighten the 2 clips.
6 .
Install the turbocharger securing bracket.
Tighten the retaining bolts to 32 Nm (24 lb.ft).
7 .
NOTE :
Do not fully close the retaining clip at this stage.
Install the LH EGR valve inlet tube.
Install a new retaining clip.